Stiebel-eltron SOL 25 PLUS Manuel d'utilisateur télécharger pdf (Page 40)

40 | SOL 25 PLUS WWW.STIEBEL-ELTRON-USA.COM

5.3 Flush Mounting On A Pitched Roof

Stiebel Eltron provides ﬂush-mounting kits for both vertical and

horizontal collector layouts, part numbers SFM001 and SFM001H,

respectively. Figure 24 shows the SFM001 kit and Figure 25 shows

the SFM001H kit. Stiebel Eltron ﬂush mount kits are generally not

recommended for mounting upon ﬂat roofs, walls, or the ground.

Instead, the 45° or 30/60° mounting systems are more appropriate

for mounting to structures other than pitched roofs.

Figure 24: Vertical Flush Mount Kit (p/n SFM001).

M10 nuts

M10 bolts

Support Rail (S201)

Mounting L-bracket (S102)

M10 nuts

M10 bolts

Support Rail (S101)

Mounting L-bracket (S102)

The collector mounting frames (p/n 185545 and/or 185546) may be

used as templates for locating the support rails and L-brackets. The

locations of fasteners may be determined from these templates.

After the mounting L-brackets are installed, assemble the frame

proﬁle rails to the support rails (S101) with the included fasteners,

then bolt the assembly to the L-brackets.

Figure 25: Horizontal Flush Mount Kit (p/n SFM001H).

5.3.1 Detailed Assembly Instructions for Flush Mounting Kit

Step 01: Major components for assembly of

the Stiebel Eltron ﬂush mounting kit (single

panel vertical version displayed).

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 76 77

Pas de commentaire

Stiebel-eltron SOL 25 PLUS Manuel d'utilisateur Page 40